中文說明
Wenxing No.0070 至 No.0075 鎖匙導針為立式配匙機使用的靠針。導針沿原匙坑位移動，刀具同時在匙坯上複製，因此導針直徑應與所用銑刀相配。廠方提供六種直徑：1.5、2、2.5、3、4 及 5mm，按編號順序各對應一種尺寸。請參閱機器說明，確認適用的導針編號。
- 編號：0070–0075
- 直徑：1.5／2／2.5／3／4／5mm
- 導針直徑應與銑刀相配
- 適用於立式配匙機
Overview
Wenxing key guides No.0070 to No.0075 are tracer pins for vertical key duplicators. The tracer follows the cuts of the original key while the cutter reproduces them on the blank, so its diameter should match the milling cutter in use. Wenxing offers six diameters: 1.5, 2, 2.5, 3, 4 and 5 mm, one size per part number in sequence. Check your machine’s documentation for the guide numbers it accepts.
- Numbers: 0070–0075
- Diameters: 1.5 / 2 / 2.5 / 3 / 4 / 5 mm
- Match tracer diameter to the milling cutter
- For vertical key duplicators
Reviews
There are no reviews yet.